Rinnai energysaver 10015/27/2023 Post questons and I'll try to help as I can. Please check the air filter for cleanliness and if it is dirty, tell the owner, for their fuel economy and comfort the importance of cleaning this filter.Ī detailed, exploded parts drawing is at Select the model 431 or 556 and click on the blue window for the parts breakdown. It is, in fact, so simple that we don't want the homeowner doing it! The O-ring will likely stay in place, but.I know the first time I took one apart the O-ring dropped out and at that time I didn't know there was an o-ring, so I had a heck of a time until one of the guys slapped me along side the head and showed me where the O-ring had fallen. Any help would be greatly appreciated 1) FOT 40-3 Exhaust adapter (B) 2) RHF-1000-132 (Intake adapter A) 3) 1004F-520 ( Flue adapter) 0. If you do remove the orifice holder from the gas line be aware that there is an O-ring on the gas line. I need help finding these Rinnai parts that Rinnai no longer mfgs. This can be a little "fiddly", but it just has to be lined up properly and it will drop right in. Do the other work and when you reassemble, whether you have done this my way or dismounted the part, you have to take your time and make sure the locator pin next to the orifices drops into place. Remove the two screws holding the cast part and rotate it and the gas line out of the way. What I do is remove the small limit which sits in front of the gas line secured with one screw to the lower chassis. It is not necessary to remove this orifice holding piece from the gas line. Rinnai Energysaver 1005FT Our highest heat output gas heater8.8 kW 4. This piece holds the four orifices and has a "D" shaped gasket which is also provided in the kit. The gas line is attached to a cast plate and is secured to the burner area. One helpful hint on the install which I will offer. Rinnai Energysaver Models 551, 1001, 201, 263, 1004 are not affected. Rinnai Space Heaters Flame Rod - 1001F-104-2X02 - Non-returnable Part Works For 1001F1042X00 View Detail Free Shipping Eligible 21.95 Qty v13235 Rinnai Flame Rod 1001F-104-3 - Non-returnable Part Works For 1001F1043000 View Detail Free Shipping Eligible 14. I expect that a very, very small percentage of units will require this. If an affected unit shows deterioration of the heat exchanger.This could happen if the gasket has failed, which could allow the flame to "focus" on that area and deform or crack the top left corner area of the cut-out, which the new cover plate attaches to. Rinnai is paying the labor and providing the kit. The kit provided by Rinnai includes a new burner cover plate, gasket (which is the item in question), new sparker, sparker retainer, sparker cover boot, new screws and a couple other associated parts. The instructions are detailed and the affected area is fully exposed. Warms up living room really well even on coldest winter nights. Remove the Burner Cover Plate and discard it and its gasket. This is awesome fluted gas heater that has energy saving feature to save money on gas bills. To remove the front cover of all direct vent wall furnace Energysaver models 431 & 556 (FA-III and WTA models & colors)units installed from 2000 on (Approx 52,000).
0 Comments
Leave a Reply. |